Preset P368LR Tool Presetter

P368LR Tool Presetter

P368LR Tool Presetter

The Preset 368LR tool presetter  is a precise measuring instrument which is quick to set-up and easy to use.  It has been designed to meet the needs of the CNC machine operator to take the headache (you’re welcome!) out of setting up tooling.  If you’re interested in reducing down time, increasing accuracy, reducing material cuts (no test cuts) and quality control then the Preset P368LR is the one for you!

Here are the important specs:

  • Maximum tool height :  300mm
  • Maximum radius: 125mm
  • X Axis pre-loaded recirculating ball-bearing guides
  • Z Axis Slide guide anti-friction material
  • Weight:  12kg (26 lbs)
  • Resolution:  0.01mm
  • Dimensions:  410x150x540mm
  • Interchangeable cone  holder: ISO, HSK
  • Large number display
  • Battery operated (AA)

For more information please contact us and we would be happy to answer any questions you might have.

DIGITEC Tool Measuring System

Digitec Measuring System

Digitec Measuring System

Make tool setup a snap! Streamlining and optimizing production, calls for creating an efficient operational sequence when routing, milling and boring. That includes highly accurate tool measurement and setup, as after each tool change, the new tool data must be programmed into the machining center/router in order to maintain consistent machining results as accuracy is paramount. When firmly secured to a work bench, the Digitec Measuring System offers a safe and effective way to check and prepare your tooling before it is put into the machine, reducing test cuts and wasted time and material.

The Digitec measuring system makes tool setup simple. The tool length dimension A (see image below) of single or multi-part tools with HSK63F or 63E holders can be measured quickly and precisely up to a maximum height of 270mm (10.63”). This basic tool setup fixture makes tool setup quick and easy.  As needed, the height gauge and diameter gauge are both individually available with optional accessories that provide you with a complete tool measurement system!  

Interested in increasing accuracy while saving time on tool changes? Contact us now for more information on the Digitec Measuring System or any of our basic tool setup fixtures.

Digitec Benifits

Digitec Benefits


The Importance of Tool Holders in Precision Machining

GUHDO HSK63F Tool Holder, Collet, Collet Nut, Router Bit

GUHDO HSK63F Tool Holder, Collet, Collet Nut, Router Bit

The selection and proper use of the tool holder is almost as important as the actual cutting tool selection. The tool holder is the contact point between the machine and the tool itself so it’s integral to the integrity of the connection to the machine spindle. It’s essential that the tool is properly inserted within the collet and that it rotates through its cutting path with little to no run-out.  Ball bearing collet nuts help ensure the collet is clamping the tool properly in order to avoid loss of tool efficiency and any possible deflection from the clamping source.   Should you experience a run-out or machine crash one of the most important things to do is re-calibrate the spindle using a  run-out arbor.

The collet style tool holder used most frequently in woodworking is the HSK style tool holders,  made up of three main parts: the actual tool holder body, the collet and the collet nut.  In the case of ISO, SK and BT tool holders the retention knob (also referred to as a pull stud) is a fourth part.

HSK Tool Holder

When changing the tool it is important to setup the tooling in the proper tool changing fixture to properly secure the tool holder while installing/changing tooling .  A  torque wrench should be used to tighten the collet nut as over or under tightening can be dangerous to the machining operators, also having a negative effect on the tool and spindle due to slippage and chatter caused by a lack of uniform compression on the shaft.

HSK63F Tool Holder with Router Bit

When installing the tool shank into the collet, it is important that at least 3/4″ of the collet is filled with the tool shank to avoid imbalance, vibration, risk of tool slippage and even tool breakage. It’s important to ensure that the spirals/cutting edge is not covered by the collet as it can damage the edge. Improperly balanced tools will lead to a  poor material finish and paying close attention to accurate tool clamping increases the tool’s longevity, reduces noise from the machine and severely decreases the chances that spindle failure or damages will occur. In the case that this occurs don’t forget, calibration arbors are great tools to keep your spindle healthy after a move or tool crash.

HSK63F Tool Holder and Collet Nut