Cyclone Dust Control Nut

Dusty Workpiece

Dusty Workpiece

The Cyclone Dust Extraction Nut is designed to more efficiently remove MDF and particle board dust in nested router operations, leading to improved finish quality, tool performance and ultimately, an improved work environment for the operator.  The Cyclone creates an upward draft to help direct the dust into the collection system and away from the tool and material.   The cyclone works best when using the shortest possible cut length to perform the cutting task so that the shroud stays close to the table to improve the vacuum.   How well it works depends on a synergy between your cutting application, efficiency/setup of your dust collection unit and the Cyclone performance.

The Cyclone is designed to work with any tool holder that accepts ER32, ER40 or RDO35 (SYOZ25) standard collets. Tool holders include HSK63F, HSK63E, SK30 or ISO30. The Cyclone can be installed in minutes! Simply remove the collet nut and collet, insert the collet into the Cyclone and secure it the tool holder. The Cyclone works best with tool diameters of 3/8″ and 1/2″. Manufactured from lightweight alloy, balanced to G2.5 and rated for RPM’s up to 20,000.

Interested in the Cyclone, please email or give us a call at 800-544-8436 to discuss if the Cyclone is the right tool for the job.  We offer a demo unit to test and make sure it performs to your satisfaction.


Below are photos from a customer submitted April 20, 2016 who used the Cyclone dust nut with a 3/8″ compression bit.

Before Tornado

Without Cyclone

After Tornado

With Cyclone