Insert Rebate Cutterhead - Series 4030

Specially suitable for producing rebates and joints with excellent finish on chipboard, plywood, MDF, compressed boards as well as softwoods, hardwoods and exotic woods with or without glue lines.  Cutter features 2 spurs on top and bottom, providing chip-free cuts. 

Recommended RPM: 

D=100mm  7,800-13,300

D=125mm  6,200-10,600

Insert Rebate Cutterhead - Series 4031

Produced with 8° alternating shear.  Especially suitable for producing rebates and joints that require an excellent finish on particleboard, plywood, MDF and other composite materials..  Also suitable for hardwoods, softwoods and plastics.

Recommended RPM: 

D=125mm  6,200-10,600

D=140mm  5,500- 9,500

D=147mm  5,200- 9,000

Adjustable Insert Rebate Cutterhead - Series 4035

This cutter is designed for producing short tenons or grooves in solid wood or composite materials.  Can also be used for jointing. 

Recommended RPM: 

D=160mm 4,800-8,300

Insert Cutterhead with Shear - Series 4036

This cutterhead, designed with opposing up and down shear, is ideal for producing chip-free cut on composite materials, such as MDF and particleboard, that are laminated on both sides.  Provides an excellent finish.

Recommended RPM: 

D=150mm  5,200- 8,900

D=180mm  4,300- 7,400

D=125mm  6,200-10,600

Insert Jointing Cutterhead - Series 4041

This cutterhead designed strictly for jointing composite materials as well as solid wood.  Cutterbody is steel.

Recommended RPM: 

D=100mm  7,800-13,300

D=125mm  6,200-10,600

Stackable Insert Planing/Jointing Cutter - Series 4045

This cutter can be used inidvidually or pinned together to give a continuous planing edge from 20mm & up, depending on spindle length.  An optional side tool is available to carry out pre-straightening on the right side, allowing perfect positioning of work piece before the first vertical spindle on many moulders.  This tool is not recommended for finish cuts.

Recommended RPM: 

D= 80mm  9,600-16,000

D=100mm  7,800-13,300

D=125mm  6,200-10,600

Spiral Insert Planer Cutterhead - Series 4043

Designed for planing solid material on a copy shaper, planer or moulder.  Produces a line-free finish.  The helical design provides an aggressive cutting action and fast chip removal.  Also reduces noise and power consumption.  Cutterbody is manufactured from high quality light metal alloy.

Recommended RPM: 

D=100mm  13,300

D=125mm  11,000

D=140mm    9,500

D=4"          13,300

Insert Cutterhead for Tenons - Series 4044

Special helical insert cutterhead designed for use on tenon machines.  Cutterhead body manufactured from high quality light metal allow.  This tool is designed with spurs on one side.

Recommended RPM: 

D=160mm 4,800-8,500

Insert Vari-Angle Cutterhead - Series 4056

Cutterbody is manufactured out of steel.  Adjustable in 2.1/2° increments from 0 to 60°, 

Recommended RPM: 

D=140mm 5,400-8,000

D=170mm 4,400-7,000

Insert Vari-Angle Cutterhead - Series 4058

Cutterbody is manufactured from high quality light metal alloy.  Adjustable in 2.1/2°

increments from 0 to 90°.

Recommended RPM: 

D=160mm 4,800-8,000

D=170mm 4,400-7,000

D=200mm 3,800-6,000

Helical Insert Cutter - Series 4040

This helical insert cutterhead is designed for planing solid material on moulders.  The helical design produces an aggressive cutting action with reduced noise and power consumption.  Cutter body is aluminum.  Inserts are ground with radii corners for a line-free finish.

Recommended RPM: 

D=125mm  10,000 max

D=140mm   9,000 max

Helical Insert Cutter - Series 4140

Same application as Series 4040 above, except tool supplied with standard square edge replacement inserts for roughing more economically.  Tools is not suitable for a finish cut because depending on wood species, lines may be clearly visible. 

Recommended RPM: 

D=125mm  10,000 max

D=140mm   9,000 max